Product Description

Flat Swiss 150mm Cut 00; 0; 1 ;2; 4

To achieve the best possible results when looking to create a smooth surface, you will want to use a coarse file to begin with, then move through finer files until you reach the finest file – this could mean owning three or four files of the same shape and size!

• Soft materials such as wood, plaster or horn and synthetic materials require coarse files or rasps. Cut 000-0
• If you are working on non-ferrous metals such as aluminium, brass or copper, milled or coarse files are recommended. Cut 000-0
• For ferrous metals such as hardened steels or titanium alloys, you will need a fine file, or a Valtitan®-coated or diamond file.
• The profile being filed dictates the file profile you will need.
• Finally, the dimension of the file you will need is determined by the size of the workpiece from which you wish to remove the material.